Carp Fishing Rigs: Best Carp Rigs and How to Make Them

The American sport of carp fishing is seeing a positive start, with more fishermen trying to catch these fish every year.

It’s simple to see why. The carp is a dangerous, large, and difficult-fighting fish that’s both common and easy to catch.

However, experienced carp fishermen will tell you that the rigs needed to catch carp are different from what you use for pike, crappie, or catfish. You’ll need to learn some tricks if you want these large fish to be your quarry.

This legendary carp is called “Nutsey Mirror”.

Learn from the Brits…

There is only one place you can go to learn more about fishing for carp.

Carp angling in the United Kingdom is more than just fishing. It’s an obsession. Anglers in England, Wales, Scotland, and Scotland turn their attention towards hard-fighting carp because they are unable to catch most types of bass or panfish and there is limited salmonid spawning ground.

You’ll have to pay thousands to get to prime carp ponds across the Atlantic. Long casts and long waits for a bite can be common. This is not like bass fishing. Anglers identify the famous fish in each body and then snap a quick photo to return it to the sea.

Catch and release is both religious practice and a legal obligation. This ensures generations of anglers have the opportunity to chase legendary fish.

In the UK, the greatest goal of an angler is to land Nutsey Mirror or Toadless Leather. Yes, trophy carp are known by these names!

The moment of victory can be hard-won by many hours, sometimes even days spent waiting by the water in tents, with rig-tying gear nearby, and a camp kettle on top. Fishing anglers have plenty of time to gear up and unique opportunities to rig because there are no boats and no static techniques to lure carp to the bait.

Anglers in the UK will often bring a kettle and camping equipment with them. This doubles the ability to shrink the sleeves of their carp rigs.

The Brits are experts in carp rigs, having created most of them, tested them all, and tweaked the best until they were perfect.

Our list is a result of pure carp-angling genius straight from the UK.

But don’t forget that you are in America

However, carp anglers can make a deal with the British for some necessities.

UK anglers can’t use boats on carp lakes. To overcome this obstacle, they must cast super-long (12′) rods with huge sinkers. They can cast great distances and cover water that isn’t accessible by boat. This means that long lines are the norm.

Casting distance is the main focus of no boats.

Sinkers as heavy and heavy as four ounces are not uncommon in the UK.

This is a big reason why you will see rods and sinkers that are longer than your boat in the UK. This can help you understand why braided lines became the preferred choice for carp.

This man is casting for carp using a rod that we would see in the surf.

However, in the States, boats are very common and long casts are not necessary. For trophy carp fishing, you will need a medium rod- too heavy. You can also fish mono with ease on the hookset. Many people pair their rods and spinning reels.

Don’t follow British advice to the letter.

Many UK carp anglers use methods that are not allowed in the US such as baiting and chumming. Respect local laws and remember that the law in your area may be different than the one here.

Do not take a technique from Britain without first thinking it through.

Essential carp rigging gear

Carp rigging gear may seem strange to anglers who are familiar with American species. It can be difficult to find the right materials, especially since the sport is still in its infancy on this side.

Here is a list of essentials:

Korda Rig Rings

For the Multi, Blowback, and Hinged Stiff Rigs, rig rings are crucial.

Korda RIG RINGS SMALL

Korda Size 11 Ring Swivels

Ronnie Rigs and the Hinged Stiff require ring swivels.

Korda Size 11 Ring Swivels

Jumping Fish Quick -Change Ring Swivels

A standard quick-change swivel is essential for the Ronnie RigIt won’t work.

Jumping fish 160pcs/Box Brass Carp Fishing Hanging Swivel Fast Change Rolling Oval Ring Link Stainless Steel Clips Chod Fishing Line Connector

Korda Hybrid Steiff Coated Braid

Carp rigs require supple lines that can hold a shape. Over the years specialty coated braids have emerged as a popular choice. The Korda braid is one of the most popular in America.

Korda Hybrid Stiff Coated Braid 20lb Gravel Brown

Gamakatsu G-Carp Specialist RX

These superb straight shank carp hooks come in three sizes: #2, #4, or #6.

Gamakatsu G-Carp Specialist RX Hook, Bronze, 6

Shaddock Fishing Hooks

The curved shank hooks of Shaddock are available in the following sizes: #2, #4, and 8. To tie the Ronnie Rig, you’ll need a hook similar to this.

Shaddock Fishing Carp Hooks - 150pcs High Carbon Steel Barb Carp Fish Hook Catfish Hook Circle Curve Shank Jigs Freshwater Saltwater

Pena Turned-Eye Carp Hooks

Pena’s inwardly turned eye hooks are essential for KD rigs. They are available in #4, #6, and #8.

Pena 100Pcs Tackle Fishing Hooks Accessories Carbon Steel Sharpened Carp Professional Barbed(6#)

News hot Hook Stop Beads

A Ronnie Rig can only be tied with a hook stop.

NEWSHOT Hook Stops Beads Carp Fishing Terminal Tackle for Pop Up Hair Chod Rigs Bait Screws(Pack of 30)

News hot Extra Heavy Tungsten Rig Putty

Every rig should have a rig putty.

NEWSHOT Extra Heavy Tungsten Rig Putty Mud Soft Sinker Silt Carp Fishing Weights Terminal Tackle (15g Green)

Sleeves with aptly

Many rigs use a shrink-to-fit sleeve for stiffness.

30Pcs Fishing Anti Tangle Sleeves Fishing Rubber Tubes Terminal Connect Hook Carp Fishing Line Aligner Carp Fishing Rubber Tubes Green

Zerone 15mm bait screws

A ring is essential for attaching your boilie rig to the bait screws.

10Pcs 15mm Bait Screws Fishing Up Bait Fishing Boilie Bait Screw Lure Pegs with Round Link Loop Swivels Ternal Tackle Aessories, Sublight Black

Phecda 12mm Pop-Ups

These bait balls float, no matter what you call them.

Phecda Sport 30pcs 12mm Smell Carp Fishing Bait Boilies Eggs / 4 Flavors Floating Ball Beads Feeder Artificial Carp Baits Lure/Hair Rig (Red Strawberry(12mm))

Yoto Baiting Needles

A baiting needle is required to run your boilie on your line.

YOTO 8 PCS Carp Fishing Baiting Rigging Needle Baiting Rig Tool Kit Swinger Driller Knot Puller Line Scissors Boilie Stops Set Combo

SAMSFX Bait Stops

These are essential for keeping your boilie in its place.

SAMSFX 500PCS Carp Fishing Hair Stops for Fishing Float Baitstops Boilie Stops Clear Color

Ling Braid Stripping Tools

This tool is required to tie most of these rigs.

There are no products.

There are no products.

There are cheaper and better options in the UK. But that doesn’t mean you should live there!

Carp Rigs explained: Step-by-Step Instructions

These rigs may require a little extra weight to cast, but not as much as the large sinkers that you will find in the UK. You can experiment with split shot, tungsten glue, and in-line sinkers to find the best fit for your circumstances.

The Hair Rig

American anglers won’t likely need a lot of weight in the line.

Carp angling was revolutionized by the hair rig, which presented these often-timid fish with a bait that was separate from the hook.

Wily carp can’t feel the danger and swallow the bait. The hair rig tricks them into sucking the terminal tackle hook and all in their mouths.

The hair rig is effective because it allows for separation. Although it is not the best, the hair rig can provide excellent hook placement and a secure grip on the lower jaw of a carp.

You should be aware that you can lengthen your hair to create more space, but longer hairs will cause more tangling and require extra care beyond 2 inches.

The hair rig works best when placed on a flat bottom that is free from weeds and other debris. It’s a proven performer that every carp angler should be familiar with. It can also be fished anywhere if it is rigged with an open-top pop-up.

Pre-tied Luroad hair rigs can be purchased in the US if you don’t want to tie your own.

The steps for American anglers should be as below:

  1. To form a small loop, tie an overhand knot using approximately 24 inches of braid or monofilament. Make sure to wet the line before you tie the knot.
  2. Trim the tag at the end of the loop.
  3. The opposite end of the line, the one that is opposite the loop, should be run through the back of the hooks’ eye.
  4. Reduce the length of your hair to approximately 2 inches.
  5. With your right hand holding the hook and hair, wrap the line with 7 turns around the hook.
  6. Then run the free end through your eye.
  7. Attach a Surgeon’s Loop to the end of your leader.
  8. Get wet and tighten your knots.
  9. The remaining tag should be removed.
  10. Use a needle to pull the hair through a braid.
  11. Place a stop at the top of the loop.
  12. Crimp split shot just a few inches below your rod, casting only enough to cast well.

The Blowback Rig

The sleeve should be attached at the junction of the hook and line.

The Blowback rig, which is basically a modified hair rig, aims to improve hook-up. This modification incorporates a ring that keeps the hair, boilie, and hooks aligned. The intention is to keep the hook in place asset, even if the bait is (r).

Although experts have doubts about whether the Blowback rig is as effective as it claims, there is no doubt that it has caught legions of carp.

This rig is versatile and can be fished with either corn on the bottom or buoyed using a pop-up.

The steps for American anglers should be as below:

  1. Cut approximately 24 inches from the coated braid.
  2. You can strip 4 to 5 inches from one end.
  3. Make a simple knot in your overhand loop, then tie it. The goal is to make a small loop.
  4. Trimm the tag at the end.
  5. Attach a rig ring to your line.
  6. Leave about 2 inches of hair and tie the ring with an overhand knot.
  7. Then thread the other end of the line through the back of your hook’s eye.
  8. Pass the point of your hook through the rig ring.
  9. Wrap the hook’s shank with 7 turns and move away from the eye. Next, pull the tag end tight and pass it through the eye.
  10. Pass the end of the tag through a sleeve.
  11. Attach an overhand loop to the tag end of your line, and tighten.
  12. Reduce the rest of the tag.
  13. To stiffen your hook’s action, pull the sleeves up and over its eye. (The video does it backward–don’t do that !!!)
  14. Attach your boilie to your hair with a needle.
  15. Place a stop at the end of the loop just above your boilie.

The KD Rig

The bottom of the KD Rig is weighed.

The trusted KD rig is a reliable alternative to Blowback’s promise of improvement. It’s a hair rig that is tied to create a severe angle between hair and shank. This is an attempt to do what only the Blowback can do: make the hook almost unusable.

The point is more easily hidden if the eye is turned upward. This can increase the chances of the hook landing on the fish, even if it ejects the bait.

To achieve dramatic angles that drive the point down and true, the KD rig requires a bent-eyed hook such as the Pena.

The steps for American anglers should be as below:

  1. Cut approximately 24 inches from the coated braid.
  2. You can strip 4 to 5 inches from one end.
  3. Make a simple knot in your overhand loop, then tie it. The goal is to make a small loop.
  4. Trimm the tag at the end.
  5. Use a baiting needle to run a boilie over the loop and attach it with a stopper.
  6. You can pinch a split shot or, even better, a little bit of tungsten glue about 1/4 inch below your bait.
  7. Then thread the tag end of the line through the back place the hook in the eye of the hook.
  8. Wrap the hook’s shank with four turns and move away from your eye.
  9. To create an angle with the hook shank, wrap your hair in a single turn.
  10. Continue wrapping your line carefully over the shank, making 4 more turns.
  11. Next, pull tight and pass the tag end through the eye.
  12. Attach a standard loop knot to the tag end. Trim it cleanly and add weight if needed.

The Hinged Stiff Rig

The Hinged Stiff rig, which is well-known for its ability to turn the hook into carp’s lips, is a favorite of pros across Europe and the UK. It’s known for its ability to reset and is almost tangle-free.

It is extremely popular and has been subject to a lot of experimentation. Not all of it was successful. Experts warn that this rig’s mechanics are more effective when the terminal section is longer than it is short, which is becoming increasingly common in carp angling.

The steps for American anglers should be as below:

  1. Cut 24 inches from mono strongIt should be. It should be strong and stiff.
  2. An overhand loop can be used to attach a ring that swivels. The goal is to let the loop hang loosely on the swivel and not as tight as a standard knot.
  3. Get wet, then cinch the loop tightly. Trim the tag end.
  4. Place a sleeve on the tag end of your line.
  5. Attach a larger loop to the end. You can wet the knot and then tighten it by trimming the tag end.
  6. Slide the sleeves up over your loop leaving some loop exposed.
  7. About 6-8 inches should be cut. Mono.
  8. It is a thread through the front hook is the eye.
  9. Wrap your line carefully in 7 turns along the shank away of the eye, before passing the tag end through the eye. A few inches will be needed at the tag end.
  10. Attach a bait screw to the end of the tag.
  11. Pass the end of the tag back through the eye.
  12. Reduce the tag to about 1/2 inch.
  13. Use a lighter to heat the tag end’s tip and smash it to make a stopper. The goal is to make a weak loop that will hold the bait screw.
  14. Attach the hook line to your swivel using a Two Turn Blood Knot.
  15. Get it wet and then cinch it down.
  16. Use a lighter to heat the tip end of the Two Turn Blood Knot Tag and then mash it to make a stopper.
  17. Use tungsten glue to mash a blob of it around the hook end of the swivel.
  18. Attach the boilie to your screw.

The Chod Rig

The Chod Rig, a traditional design, has proven its worth over the years. It was introduced by Sir Terry Hearn to British anglers. It uses excellent mechanics to position the hook in the best possible place for a solid bite. It will turn toward a carp regardless of which direction it approaches.

This rig is best suited for bent-eye hooks like the Pena.

The steps for American anglers should be as below:

  1. Cut 6-8 inches fromMono strongIt should be. It should be strong and stiff.
  2. This should be threaded through the hook’s eye.
  3. About 2 inches of the line should be pulled to the tag’s end.
  4. Wrap your running end around the shank and make 7 passes toward the barb.
  5. Turn the running end through the eye, and then tighten the knot.
  6. Place a bait screw with a ring over the tag end.
  7. Pass the tag end through your eye. Then, using a lighter melt the tag and place it in a stopper. The bait screw should be held in place by this small loop.
  8. Attach the line to the swivel with a Two Turn Blood Knot. Keep in mind that the length of the bait will determine the height off the bottom. A good starting point is 2 inches.
  9. Use a lighter to melt the line and press it to tighten up the knot.
  10. You can curve the mono with your fingers between the hook and the swivel. A nice, aggressive bend is what you want in your line.
  11. Place a little bit of tungsten glue over the hook-side swivel.

Although this video is excellent, it is too complicated. You can save time and effort by using a bait screw instead of bait floss.

Lewis
Lewis Mark is a vastly experienced fly fisher. His encyclopedic knowledge of fly tying has led to start blog on fishing. He also review Fishing equipment based on his knowledge and experience.